sv
en
Reduce waste & increase profitability! Do you have high production losses due to faulty snus cans? Avoid unnecessary costs and material waste with our innovative can divider – a smart solution for snus productions that want to streamline and save money.
Our advanced camera system for overhanging pouches immediately identifies if the pouches are jammed in the lid when the lid is put on. These cans are automatically sent to the can divider, which opens, empties and separates the cans and pouches, which enables reuse instead of disposalToday, large amounts of snus and cans are discarded unnecessarily – with our can divider you can turn loss into profit!
| Capacity: | 6-8 cans/minute |
| Compatible dosage formats: | Standard portion snus cans |
| Input: | Automatic via buffer track and separator (integrator) |
| Integration: | Prepared for integration into existing production line |
| Power supply: | 230/400V 50Hz 16A |
| Compressed air requirement: | 6 bar |
| Machine dimensions (L x W x H): | 1490mm x 453mm x 1086mm (+-30mm, adjustable) |
The turner takes a firm grip on the can, moves it to the side and turns it upside down – so that the contents easily fall out. The can is then carefully blown clean using a directed air nozzle, to ensure that no snus pouches remain.
Our presser is a reliable final control station that ensures that no lid is left to chance. As the lid passes on the conveyor, it is pressed down – so that even loose or skewed lids are securely fastened. No waste lids fall off unnecessarily, but are taken to the correct sorting.
In snus production, large quantities of cans and pouches are discarded daily due to small deviations in weight or incorrect lid assembly. Without a can divider, these cans must be thrown away completely, which means both economic and environmental losses.
With an automated can divider these incorrect cans can be opened, emptied and separated, so that both snus and cans can be reused. This means that fewer raw materials are wasted and that production becomes more sustainable – an important factor both economically and environmentally.
Incorrect cans not only mean material waste but also high costs in the form of lost products and extra work. Manually opening and emptying the cans requires time and personnel, which creates unnecessary operating costs.
Our can divider eliminates this problem by automatically identifying, separating and reusing incorrect cans and pouches. This results in:
The investment in a can divider can therefore pay for itself in a short time through the savings it generates.
Manual handling of incorrect cans not only mean higher labor costs but also a bacterial risk, as the snus is exposed when the cans are opened by hand. This means that all contents must be thrown away, even if just one pouch is pinched or the weight deviates from certain parameters.
With a can divider, the process becomes fully automated, which eliminates contact with the snus and thus reduces the risk of bacteria. At the same time, it ensures consistent and high quality in production by quickly identifying and handling defective cans without disrupting the flow.
Our can divider is designed to efficiently sort faulty snus cans for reuse or recycling. It separates the lid, can and pouches, automating the entire handling process and making the recycling flow more efficient.
It is mainly for modern snus producers who want to streamline and automate the process where incorrect (overweight, underweight, overhanging pill) cans are handled. By investing in the dose divider, you reduce manual work, save time and create a more sustainable production flow.
For snus producers, this is a smart investment that pays off quickly. By automating the sorting of defective cans:
Are you reducing personnel costs?
Recycles more materials
Increases the pace of the production line
Contributes to your sustainability goals
It is a cost-effective way to both future-proof production and make it more resource-efficient.
The machine handles standard portioned snus cans and separates the lid, bottom and contents with high precision.
The capacity is adjusted to your needs, but the machine is built to handle 6-8 cans per minute. Perfect for manufacturers with high production rates.
Logimark's "Overhanging pouch" camera system scans and analyzes cans in a fraction of a second without slowing down production. The system and associated scale detect whether the can:
weighs too much
weighs too little
has an overhang
This step takes place directly in the production line before the can divider takes over.
The cans that are sorted out end up on a buffer track. It functions as an intermediate storage that collects cans when there is a queue at the can divider – so that the flow is always kept even and stable.
A separate unit, a so-called separator or intacter, feeds the cans one by one from the buffer path to the can divider. This ensures that each can is handled accurately and without interference.
When the can enters the machine, it is gripped by a side belt that pulls it forward. At the same time, guides move between the lid and the can and push (or pull) the lid off – all in a controlled and automated flow.
The can is then passed to a turner who grabs it, turns it upside down and lets the contents (the snus pouches) fall out. A blow nozzle then blows the can clean of any residue.
The lid is transported further past the can while the can is inside the turner. After the sorting process, both the can and lid continue on different paths to their respective return systems.
Yes, that's the whole point. Both the can and lid go back to their respective feeders to be reused in production – reducing material waste and making the process more sustainable and cost-effective.
Reduce waste & increase profitability! Do you have high production losses due to faulty snus cans? Avoid unnecessary costs and material waste with our innovative can divider – a smart solution for snus productions that want to streamline and save money.
Our advanced camera system for overhanging pouches immediately identifies if the pouches are jammed in the lid when the lid is put on. These cans are automatically sent to the can divider, which opens, empties and separates the cans and pouches, which enables reuse instead of disposalToday, large amounts of snus and cans are discarded unnecessarily – with our can divider you can turn loss into profit!
In today's snus production, large quantities of cans and pouches are thrown away unnecessarily due to incorrect weight or pinched bags when assembling the lid. Without an effective solution, time-consuming manual work is required where cans are opened and emptied by hand – a process that is not only costly but also carries a high bacterial risk, forcing producers to discard all contents. With our automated can divider this problem is eliminated! Snus and cans can instead be emptied and refilled, which reduces waste, saves costs and streamlines production. A smart investment for a more sustainable and profitable snus production!
Here is an overview of how the process works:
Sorting via weighing system – Cans that do not meet the weight requirements are automatically sorted out – this may be due to: overweight, underweight or overhanging pouches.
Buffer lane collects the cans – The faulty cans are collected on a buffer path. This allows the machine to handle variations in the flow without affecting the pace of production.
Separation and feeding – A separator – also called an intacter – feeds the cans one by one into the can divider to ensure a smooth and controlled process.
Lid separates from can – The side band grips the can and pulls it forward. At the same time, guides are inserted between the can and the lid to separate them. This is done both quickly and gently.
Products are emptied and the can is cleaned. – The can is transported sideways to a turner, which grabs the can, turns it upside down and empties the contents. An air nozzle blows the can clean of any residue.
Lid and can are reused – While the can is processed in the turner, the lid continues along the belt and the lid and can are sorted into different containers. After sorting, both the can and lid return to their respective feeding systems for reuse in production.
Do you want to see how the machine works in your production on your material or product? Book a free Demo We will be happy to show you the machine (or similar machine) in operation and how we can tailor the solution based on your needs.
Fill out the form and we will contact you!
You can also call us directly at + 4610-444 1600.
